Range Rover Sport 2.7 TDV6 EGR Valve Blanking Removal Delete Kit

Does your Land Rover Discovery or Range Rover Sport 2.7TDV6 suffer from hesitation and a flat spot?

Do you feel the engine is being restricted?

Is your engine less responsive than it used to be?

Belching out black smoke?

Your Land Rover TDV6 could be suffering from a faulty EGR (Exhaust Gas Recirculation) valve.  The EGR valve is a very crude device that diverts spent, hot, exhaust gases back into the inlet manifold to dilute the fresh clean combustion air.

The best solution is to remove the EGR valve completely, this kit, supplied by JGS4x4 contains everything you need to blank off the EGR valves, safely and easily from early 2.7TDV6 models.

• Reduce Smoke
• Increase Power
• Increase Torque
• Increase MPG
• Improves Drivability

Fits models up to 7A chassis number, not EU4 engines.

Fitting guide included. Can be fitted by a competent DIY mechanic, if you have any doubts how to fit this kit, seek professional advice.

Suitable for the following models:

Land Rover: Discovery 3, TDV6, 2004-2007, Up To VIN 7A
Land Rover: Range Rover Sport, TDV6, 2005-2007, Up To VIN 7A

For later models, the EGR valves have to be disabled via the ECU when fitting a blanking kit.

Please Note:

From May 2018 the MOT rules in the UK are changing! Amongst the stricter rules are new legislation regarding emissions including DPF's and EGR systems. Any modifications/removal to emissions related devices, this includes DPF’S and EGR’s is now a major fail.

During an MOT test, the tester can only do a visual check of the emissions systems, the MOT tester is not permitted to remove covers or guards to make an inspection.

You need to be aware of this before removing or modifying any emissions related devices on your car.

Technical Download